pc abs color masterbatch for plastic color plastic virgin material pellet
Description of this pc abs color masterbatch for plastic color plastic virgin material pellet pc abs color masterbatch for plastic color plastic virgin material pellet, in the process of pigment prodSend Inquiry Now
Our Product Detail
The carrier of the special color master is the same as the plastic variety of the product, which has good matching property.
pc/abs color masterbatch for plastic color plastic virgin material pellet, under the extensive use conditions, only plastic damage will be presented, and the residual stress will be reduced, and the stress cracking resistance will be improved. At normal temperature, the impact strength will be 3~4 times of PC.ageing resistance performance is good, after 120 ℃, 140 hours after treatment, the impact strength of PC still more than 2 times. The melt viscosity is reduced by 1/3, so the molding temperature can be lower, the molding is easy, the residual stress is reduced, and the product color is also better. In addition, the melt viscosity of blends decreased with the increase of molding pressure and improved the molding.
|Test Project||Test Methods||Unit||Typical Values|
|Flexural Stress||GB/T 9341-2000||Mpa||48|
|Notched Impact Strength||GB/T1043-93||KJ/m2||≥10|
|Elongation At Break||GB/T1040-92||%||40-80|
|Heat Distortion Temperature||GB/T1634-2004||°C||≥85|
|Testing Condition||23±2°C, 50±5%RH|