Our Product Detail

Virgin Nylon Polyamide 6 GF30 Injection Grade Pa6 Gf30 Pa6 Plastic Raw Material Price

Virgin nylon polyamide 6 gf30 injection grade pa6 gf30 pa6 plastic raw material price is translucent or opaque crystalline polymer with a specific gravity of 1.12-1.14. It has the characteristics of thermoplastic, light weight, good toughness, good chemical resistance and durability. Widely used in automotive parts, mechanical parts, electrical and electronic products, engineering accessories and other products.Corrosion resistant, very resistant to alkali and most salt liquids, also resistant to weak acids, engine oil, gasoline, aromatic hydrocarbon-resistant compounds and general solvents.

Send Inquiry Now

Download Instruction

Our Product Detail

Description of this Virgin Nylon Polyamide 6 GF30 Injection Grade Pa6 Gf30 Pa6 Plastic Raw Material Price

Virgin nylon polyamide 6 gf30 injection grade pa6 gf30 pa6 plastic raw material price is translucent or opaque crystalline polymer with a specific gravity of 1.12-1.14. It has the characteristics of thermoplastic, light weight, good toughness, good chemical resistance and durability. Widely used in automotive parts, mechanical parts, electrical and electronic products, engineering accessories and other products.Corrosion resistant, very resistant to alkali and most salt liquids, also resistant to weak acids, engine oil, gasoline, aromatic hydrocarbon-resistant compounds and general solvents.

Virgin nylon polyamide 6 gf30 injection grade pa6 gf30 pa6 plastic raw material price has the advantages of high mechanical strength, high softening point, good wear resistance, self-lubrication, cushioning, sound deadening, excellent oil and chemical corrosion resistance, and good electrical insulation. Because of these superior performances, PA composite has already replaced some metals being as structural materials.

Parameters of this Virgin Nylon Polyamide 6 GF30 Injection Grade Pa6 Gf30 Pa6 Plastic Raw Material Price
 
Item  Test method   value Unit
Melting point  ISO 11357-3  179  ℃
Density  ISO 1183-3 1.02 g/cm3
Molding shrinkage   ISO 294-4 0.9/0.9 %
water absorption   ISO 62  0.6 %
tensile yield strength ISO 527-1/-2  47 Mpa
elongation at break  ISO 527-1/-2  >200 %
bending strength ISO 178  60 Mpa
Flexural modulus   ISO 178  1500 Mpa
Shore hardness     ISO 868  77 D
 
Pictures of this Virgin Nylon Polyamide 6 GF30 Injection Grade Pa6 Gf30 Pa6 Plastic Raw Material Price
 
FAQ of this Virgin Nylon Polyamide 6 GF30 Injection Grade Pa6 Gf30 Pa6 Plastic Raw Material Price
 
 
Certificate of this Virgin Nylon Polyamide 6 GF30 Injection Grade Pa6 Gf30 Pa6 Plastic Raw Material Price
 
Company of this Virgin Nylon Polyamide 6 GF30 Injection Grade Pa6 Gf30 Pa6 Plastic Raw Material Price
 
 
 
Looking forward to your inquiry for this Virgin Nylon Polyamide 6 GF30 Injection Grade Pa6 Gf30 Pa6 Plastic Raw Material Price

You might also like

Leave A Message